Guangzhou rongan fire equipment co. LTD
Guangzhou rongan fire equipment co. LTD
Add to Cart
Fire extinguishing action procedure:
The device should have two starting modes: automatic and manual. A mechanical emergency operating mechanism can also be added. This manual only describes the automatic and manual starting modes.
1) Automatic control
1. Fire extinguishing device 2. Sound and light alarm 3. Smoke sensor 4. Temperature sensor 5. Vent door light 6. Warning sign 7. Emergency start and stop button
Schematic diagram of cabinet type heptafluoropropane gas fire extinguishing device
Under normal conditions, the control mode of the fire alarm controller is selected in the "automatic" position, and the fire extinguishing device is in the automatic control state. When a fire occurs in the protected area, the fire detector sends a fire alarm signal, and the fire alarm controller sends an audible and visual alarm signal, and at the same time sends a linkage command to shut down ventilation equipment such as air conditioners, fans, and fireproof roller shutters. After a delay of 0~30 seconds (people in the protected area must evacuate quickly at this time), the DC24V/1.5A fire extinguishing signal is output to drive the starter electromagnetic to open the container valve on the fire extinguishing agent storage bottle, and release HFC-227ea to extinguish the fire.
2) Manual control
When someone is working or on duty in the protected area, the control mode of the fire alarm controller is selected in the "manual" position, and the fire extinguishing device is in the manual control state. If a fire occurs in a protected area, press the "start" button on the fire alarm controller to start the fire extinguishing device according to the "automatic" program to extinguish the fire. You can also press the "emergency start" button set at the door of the area after confirming that all personnel have evacuated, and the delay will be 0-30 seconds to release HFC-227ea to extinguish the fire. When a fire alarm occurs, if it is found that there is no need to activate the fire extinguishing device to extinguish the fire within the delay time, the "Emergency Stop" button on the fire alarm controller or outside the protection area door can be pressed to terminate the fire extinguishing procedure.
Main parameters of fire extinguishing equipment
| Design working pressure(20℃) | Maximum working pressure(50℃) | Maximum filling density | Storage container volume | Injection time | Stable use environment | working pressure | operational current |
| 2.5Mpa | 4.2Mpa | ≤1150kg/m | 40L/70L/90L/100L/120L/150L/180L | ≤10s | 0~50℃ | DC24V | 1.5A |
Company introduction:
Guangzhou Rongan Fire Protection Equipment Co., Ltd. is a professional manufacturer of fire protection facilities integrating R&D, production, design and sales services. The company has experts from the national fire protection industry standards committee and a group of professional technical service teams with more than ten years of experience in the fire protection industry, and will spare no effort to provide you with the most intimate and professional comprehensive technical solutions for fire protection engineering products. "Rongxiao" series products produced by the company have passed the national compulsory product certification and the national fixed fire extinguishing system inspection center, with reliable quality and stable performance, and the factory has passed the ISO9001 quality system certification.
Frequently asked questions:
Q1: Are you a manufacturer or a trading company? A1: We are manufacturers.
Q2: How long is the delivery time? A2:10 days, which can be negotiated according to the quantity.
Q3: How to deal with the fault? A3: During the warranty period, we will provide you with a remote emergency plan during working hours. During the free maintenance period, the company will replace spare parts or complete machines that have failed due to defects or quality problems free of charge.